Stocked Weld Procedure
Qualification Materials

AWS D1.5 Bridge Code Materials

M270/A709 GR50W	1" THK x 9" x 24"	Beveled 10
M270/A709 GR50W	1" THK x 6" x 12"	Square Cut
M270/A709 GR50W	1-1/2" THK x 9" x 24"	Beveled 10
M270/A709 GR50W	3/8" THK x 3" x 28"	Backing Bars

Above materials have milled bevels along one 24" side. Direction of roll perpendicular to beveled edge. The 3/4" and 1-1/2" thick material is purchased with charpy impact tests at 40 degrees F with 20 ft. Lbs. Minimum. It also has carbon equivalent of 0.45 which will qualify the welding of grade 50 and 36 material also. M270/A709 GR50 also available.

ASME Section IX Code Materials

Plate coupons are stocked 5" wide x 12" long

Size	Plate Material	ASME P#	Group
3/8", 1/2" & 1-1/2"	SA516 GR 60	P1	G1
3/8", 1/2" & 1-1/2"	SA516 GR 70	P1	G2
3/8", 1/2" & 1-1/2"	SA204 GR B	P3	G2
1-1/2"	SA533 GR B	P3	G3
3/8", 1/2" & 1-1/2"	SA387 GR 11	P4	G1
3/8", 1/2" & 1-1/2"	SA387 GR 22	P5A	G1
3/8", 1/2" & 1-1/2"	SA387 GR 5	P5B	G1
3/8", 1/2" & 1-1/2"	SA387 GR 91	P5B	G2
3/8", 1/2" & 1-1/2"	SA240 410	P6	G1
3/8", 1/2" & 1-1/2"	SA182 F6NM	P6	G4
3/8", 1/2" & 1-1/2"	SA240 410S	P7	G1
3/8", 1/2" & 1-1/2"	SA240 304/L	P8	G1
3/8", 1/2" & 1-1/2"	SA240 S31803	P10H	G1
3/8"	SB209 3003	P21
3/8"	SB209 5052	P22
3/8"	SB209 6061	P23
3/8"	SB209 5083	P25
3/8"	SB171 C70600	P34
3/8"	SB171 C61400	P35
3/8"	SB162 N02200	P41
3/8" & 1-1/2"	SB127 N04400	P42
3/8" & 1-1/2"	SB168 N06600	P43
3/8"	SB575 N10276	P43
3/8" & 1-1/2"	SB463 N08020	P45
3/8", 1/2" & 1-1/2"	SB409 N08810	P45
3/8"	SB265 GR 2	P51

Above materials have milled bevels. 3/8" & 1/2" thick plates are stocked with a
37-1/2 degree bevel along one 12" side. 1-1/2" thk. plates have a compound bevel
37-1/2 degrees for 3/4" and balance at 10 degrees. Other bevels available upon request.

All materials are vibro etched with material type, grade, heat number
and direction of roll. Mill test reports are sent with shipments. The
P1 materials are purchased normalized and conform to both group 1 & 2
requirements. Dual certified to both SA516 GR60 & GR70.

Pipe Materials	P# & Group#	Pipe Materials	P# & Group#
SA106 GR B	P1 G1	SB241 6061	P23
SA333 GR 6	P1 G1	SB241 5086	P25
SA335 P1	P3 G1	SB466 706,715	P34
SA335 P11	P4 G1	SB165 400	P42
SA335 P22	P5A G1	SB167 600	P43
SA335 P5	P5B G1	SB169 276	P43
SA335 P9	P5B G1	SB423 825	P45
SA312         TP304,316 (L)	P8 G1	SB464 802	P45

Other materials and alloys are available. Please call for current pricing & additional qualification materials which can also be furnished.