test.html
‚?P8"
‚?0*KÿÒ | Products/Services | Typical Customers | About us | Contact Us | Home Page |
Triangle Engineering, Inc. offers complete Weld Testing Services,
including non-destructive and destructive test facilities, on-site
consulting, inspection, and procedural review. NEW - Please ask us about our 24 hour Expedited
Testing Services ASTM Class B-1 Extensiometer coupled to an electronic high magnification
recorder for stress strain curves, yeild strength and other physical
properties. Accurately controlled by a microprocessor and verified by an NIST
calibrated strip chart recorder. Capacity: 2000 degrees F. Designed, built, and sold by Triangle Engineering, Inc., this
unit is also used by us in the testing welder performance and
weld procedure qualifications. Micros, macros, photomicrographs, fillet weld and brazed joint
evaluation --Impact removal, machining, notching and photomacrographed for
H.A.Z. notch location --All performed in-house utilizing uniquely designed fixtures
for accurate sample and notch location --Sub-size--transition curves--stainless steel ![]()
Full Testing Services
Procedural qualification services include post weld heat treatment,
bend, tensile, and impact testing, when required.

Tension and compression testing up to 120,000 pounds

Resistant Type Stress Relief Unit
Guided Bend Testing Machine

Metallurgical Polishing Equipment

Charpy Impact Testing

| Products/Services | Typical Customers | About us | Contact Us | Home Page |
TRIANGLE ENGINEERING, INC.
6 Industrial Way
Hanover, MA 02339
(781) 878-1500
(781) 878-1374
Fax: (781) 878-2547
Website developed
& maintained by
Sigsby Communications